H11 H8 H9 LED bulbs installation Guide

Installing H11 LED bulbs, H8 LED bulbs, or H9 LED bulbs in your vehicle can significantly improve your lighting performance. These bulbs are often used for low beam, high beam, and fog lights.

Here is a detailed installation guide: Tools and Preparation
Tools Needed: Screwdriver (flat or Phillips, depending on your vehicle)
Gloves to protect your hands and prevent oils from getting on the bulbs
(Optional) Socket wrench set
Preparation: Ensure your vehicle is parked on a flat surface and turned off.
Open the hood and disconnect the battery to prevent any electrical issues during installation.


Step-by-Step Installation Guide
Step 1: Access the Headlight Assembly
Locate the Headlight Assembly:Refer to your vehicle's owner manual to find the exact location of the headlight assembly. This is typically found at the front of the vehicle, behind the headlight lens.
Remove Protective Covers:Some vehicles have protective covers or dust caps behind the headlight assembly. Remove these covers by twisting or unclipping them to access the bulbs.


Step 2: Remove the Old Bulb
Disconnect the Power Connector:Locate the power connector attached to the old bulb. Gently press the release tab and pull the connector away from the bulb.
Remove the Bulb:Twist the bulb counterclockwise (usually 1/4 turn) to release it from the socket. Carefully pull the bulb out of the headlight housing.


Step 3: Install the New LED Bulb
Insert the New LED Bulb:Align the LED bulb's tabs with the notches in the headlight housing. Insert the bulb and twist it clockwise until it locks into place.
Reconnect the Power Connector:Attach the power connector to the new LED bulb. Ensure it clicks into place securely.


Step 4: Test the Bulb
Reconnect the Battery: Reconnect the vehicle's battery if it was disconnected during the preparation step.
Test the Bulb: Turn on your vehicle’s headlights to test the new LED bulbs. Ensure both low and high beams (if applicable) are functioning correctly and the bulbs are seated properly.


Step 5: Reassemble and Finalize
Replace Protective Covers:Reattach any protective covers or dust caps you removed earlier.
Close the Hood:Close the vehicle’s hood and perform a final check to ensure everything is secure and properly installed.


Additional Tips
Adjust the Headlight Beam:After installing new bulbs, you may need to adjust the headlight beam alignment to ensure proper illumination and avoid blinding other drivers. Refer to your vehicle’s manual for instructions on how to adjust the headlight aim.
Check for CANbus Compatibility:Some vehicles may require CANbus decoders to prevent flickering or dashboard error messages. If your new LED bulbs are flickering or causing errors, you may need to install a CANbus decoder.

Handle with Care:Avoid touching the LED chips or the glass part of the bulbs with your bare hands. Oils from your skin can damage the bulbs. Use gloves or a clean cloth when handling the bulbs.


Conclusion:
Installing H11, H8, or H9 LED bulbs is a straightforward process that can significantly improve your vehicle’s lighting. By following this guide, you can ensure a successful installation and enjoy the benefits of brighter, more efficient LED headlights.

If You Need Video Guide:

Watch the Novsight Headlight bulb install guide Video on the YouTube

If you are not sure whether the H11/H8/H9 led bulb will be suitable for your vehicle or not, you can check with Novsight vehicle bulb finder on the top bar.

Contact us: service@novsights.com

Filters

Product type
Filters
Sort by:
Product type

13 products

Save $30.99
N60 Ultra Series | H11 H9 H8 LED Bulbs Super Bright 200W 40000LM 6500K White | 2 Bulbs - NOVSIGHTN60 Ultra Series | H11 H9 H8 LED Bulbs Super Bright 200W 40000LM 6500K White | 2 Bulbs
Save $10.42
N52 Plus Series | H11 H9 H8 LED Bulbs Automotive-Grade Chip 100W 20000LM 6500K White | 2 Bulbs - NOVSIGHTN52 Plus Series | H11 H9 H8 LED Bulbs Automotive-Grade Chip 100W 20000LM 6500K White | 2 Bulbs - NOVSIGHT
Sold out
N30 Standard Series Wireless | H11 H8 H9 LED Bulbs 1:1 Integrated Design 55W 12000LM 6500K White | 2 Bulbs - NOVSIGHTH11  LED headlight bulbs with perfect beam pattern
Save $15.02
N11 Standard Series | H11 H8 H9 LED Bulbs Cost-Effective 60W 13000LM 6500K White | 2 Bulbs - NOVSIGHTN11 Standard Series | H11 H8 H9 LED Bulbs Cost-Effective 60W 13000LM 6500K White | 2 Bulbs - NOVSIGHT
Save $14.36
N62 Ultra Series Wireless | H11 H8 H9 LED Bulbs Automotive Specific Chipsets 100W 22000LM 6500K White | 2 Bulbs - NOVSIGHTN62 Ultra Series Wireless | H11 H8 H9 LED Bulbs Automotive Specific Chipsets 100W 22000LM 6500K White | 2 Bulbs - NOVSIGHT
N63 Upgraded Mini 1:1 Series Wireless | H11 H8 H9 LED Bulbs Original Mini Size 90W 20000LM 6500K White | 2 Bulbs - NOVSIGHTN63 Upgraded Mini 1:1 Series Wireless | H11 H8 H9 LED Bulbs Original Mini Size 90W 20000LM 6500K White | 2 Bulbs - NOVSIGHT
Save $31.51
N67EP Series | H11 H8 H9 LED Headlight Bulbs Eco-friendly Sustainability Extremely Brighter Light 140W 32000LM | 2 Bulbs - NOVSIGHTN67EP Series | H11 H8 H9 LED Headlight Bulbs Eco-friendly Sustainability Extremely Brighter Light 140W 32000LM | 2 Bulbs - NOVSIGHT
Save $31.51
N67 Pro Series | H11 H8 H9 LED Bulbs Intelligent Cooling System 140W 30000LM 6500K | 2 Bulbs - NOVSIGHTN67 Pro Series | H11 H8 H9 LED Bulbs Intelligent Cooling System 140W 30000LM 6500K | 2 Bulbs - NOVSIGHT
Sold out
H11 fog light with packageH11 fog light socket type
N66 Pro Series Wireless | H11 H8 H9 LED Bulbs Perfect Beam 80W 18000LM 6500K White | 2 Bullbs - NOVSIGHTN66 Pro Series Wireless | H11 H8 H9 LED Bulbs Perfect Beam 80W 18000LM 6500K White | 2 Bullbs - NOVSIGHT

How do I install the H11 H8 H9 LED bulbs?